Παρελκόμενα

QUICK SEAM PRODUCTS

quickprime plusQuickPrime Plus
QuickPrime Plus is a high solids primer designed to clean and prepare the RubberGard EPDM membrane and/or substrate prior to application of QuickSeam products, Pourable Sealer or Lap Sealant. It must be applied with a QuickScrubber or QuickScrubber Plus pad and handle.

 

quickseam splice tapeQuickSeam Splice Tape
QuickSeam Splice Tape is a EPDM/butyl-based, self-adhesive tape designed for field splicing of Firestone RubberGard EPDM membrane panels. It is fully cured and provides consistent adhesive thickness within the seam.

 

quickseam reinforced perimeter fastening stripQuickSeam Reinforced Perimeter Fastening Strip (RPFS)
QuickSeam Reinforced Perimeter Fastening Strip is a strip of reinforced EPDM membrane with a QuickSeam tape strip factory laminated to it along one edge. The strip is used to execute non-penetrating base tie-in details.

 

quickseam rma stripQuickSeam RMA Strip
QuickSeam RMA Strip is a strip of reinforced EPDM membrane with a QuickSeam tape strip factory laminated to it along both edges. The strip is used for non-penetrating RubberGard EPDM membrane attachment in Firestone RMA Systems.

 

quickseam batten cover stripQuickSeam Batten Cover Strip
The Firestone QuickSeam Batten Cover Strip is a 152 mm (6") wide, semi-cured EPDM strip laminated to a QuickSeam tape. The strip is used to cover and seal Batten Strips, as specified in the Firestone Mechanically Attached System (MAS).

 

rubbergard quickseam formflash 9in webQuickSeam FormFlash
Firestone QuickSeam FormFlash consists of a 152 mm (6"), 229 mm (9"), 305 mm (12") or 450 mm (18") uncured EPDM strip factory-laminated to QuickSeam Tape. The strip is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Firestone specifications and details.

 

quickseam sa flashingQuickSeam SA Flashing
Firestone QuickSeam SA Flashing is a 457 mm (18") wide, 1.52 mm thick non-reinforced RubberGard EPDM membrane, fully laminated to Firestone QuickSeam Tape. The SA Flashing can be used to easily flash details where cured EPDM is required or preferred: curbs, parapets, gutters, general roof repairs, drain and pipe flanges.

 

quickseam flashingQuickSeam Flashing
QuickSeam Flashing is a 127 mm (5") wide uncured EPDM strip laminated onto a QuickSeam tape. The strip is designed to flash metal roof edging profiles.

 

quickseam pipe flashingQuickSeam Pipe Flashing
QuickSeam Pipe Flashing is a 'one size fits all' preformed EPDM pipe boot used for flashing of round, accessible penetrations of 25 mm to 150 mm.

 

quickseam conduit flashingQuickSeam Conduit Flashing
QuickSeam Conduit Flashing is a 'one size fits all' preformed EPDM pipe boot used for flashing of round, accessible penetrations of 13 mm to 64 mm.

 

quickseam penetration pocketPenetration Pocket Kit
The Penetration Pocket Kit is specifically designed to be used around small pipe penetrations, clusters of pipes, l-beams, etc.

 

quickseam walkway padQuickSeam Walkway Pads
QuickSeam Walkway Pads are high-quality rubber pads with QuickSeam Tape factory laminated to the bottom and used for protection of RubberGard EPDM membranes in areas of regular traffic.

 

 


ADHESIVES

ba2012 all pails web 0Bonding Adhesive BA-2012
Bonding Adhesive BA-2012 is a solvent-based contact adhesive designed specifically for bonding Firestone RubberGard EPDM membranes to wood, metal, masonry, Polyiso insulation boards, Firestone ISOGARD™ HD cover boards and other acceptable substrates.

 


ba2012s canister 17l and 750ml spray can 01 webBonding Adhesive BA-2012 S
Bonding Adhesive BA-2012 S is a sprayable solvent based contact adhesive specifically designed for bonding Firestone EPDM membranes to approved insulations in addition to wood, metal, masonry and other acceptable substrates.

 

bonding adhesiveBonding Adhesive BA-2004 (T)
Bonding Adhesive BA-2004 (T) is a solvent-based contact adhesive designed specifically for bonding Firestone RubberGard EPDM membranes to wood, metal, masonry, Polyiso insulation boards, Firestone ISOGARD™ HD cover boards and other acceptable substrates.

 

modular water based bonding adhesiveModular Water-Based Bonding Adhesive
Modular Water-Based Bonding Adhesive is a water-based adhesive designed specifically for bonding Firestone RubberGard EPDM membranes to OSB and plywood.

 

splice adhesiveSplice Adhesive
Splice Adhesive is a water repellent butyl-based adhesive for bonding EPDM to metal substrates and other acceptable substrates.

 


SEALANTS

lap sealant hsLap Sealant HS
Lap Sealant HS is designed to seal and mechanically protect the exposed edge of QuickSeam products. Lap Sealant is also used as a general purpose sealant.

 

water block sealantWater Block Sealant
Water Block Sealant is a butyl-based sealant used for watertight seals when applied under compression e.g. under roof drains or behind termination profiles.

 

pourable sealerPourable Sealer
Pourable Sealer is a two-component polyurethane sealer designed to create a watertight seal around small pipe penetrations, clusters of pipes, l-beams in a penetration pocket detail.

 


CLEANING AGENT & COATING

splice washSplice Wash
Splice Wash is a highly volatile solvent used for pre-cleaning contaminated RubberGard EPDM membranes.

 

cleaner spray can retouched cropped webWater Block Sealant
Water Block Sealant is a butyl-based sealant used for watertight seals when applied under compression e.g. under roof drains or behind termination profiles.

 

acrylitop coatingPourable Sealer
Pourable Sealer is a two-component polyurethane sealer designed to create a watertight seal around small pipe penetrations, clusters of pipes, l-beams in a penetration pocket detail.

 


PLATES & FASTENERS

All Purpose & Heavy Duty Fasteners

All Purpose & Heavy Duty Fasteners are specifically designed screws for mechanical attachment of the RubberGard EPDM membrane, roofing insulation or accessories such as batten bars, termination bars, etc. to steel, wood and concrete decks.

fastener plus insulation plateInsulation Fastening Plates
Insulation Fastening Plates are designed for attaching insulation boards to the structure.

 

 

v plateV-Plates
V-Plates are 57 mm wide galvanized steel plates used for anchoring Firestone Reinforced Perimeter Fastening Strips.

 


coiled metal batten stripMetal & Coiled Metal Batten Strips
Metal & Coiled Metal Batten Strips are 25 mm wide pre-punched galvanized steel strips for anchoring EPDM membrane sheets.

 

termination barTermination Bar
The Termination Bar is an extruded aluminium profile designed for termination of the RubberGard EPDM membrane against smooth walls in all Firestone Systems.

 

aluminium drain bar

Aluminium Drain Bar

The Aluminium Drain Bar is specifically designed for termination of the RubberGard EPDM membrane at the edge of the roof as illustrated in Firestone Ballasted and Fully Adhered Systems.

 


TOOLS

bonding adhesive spray guns webSpray Gun Kit
The Firestone Spray Gun Kit includes the spray gun (with or without extension) and a rubber hose. Both products are specifically designed to spray the Firestone adhesives.

 

quickscrubber pad plus handleQuickScrubber pad and handle
Used for the application of QuickPrime Plus primer.

 

 

quickscrubber plus stand up tool 0QuickScrubber Plus stand-up tool
Used for application of QuickPrime Plus primer.

 

 

silicone rubber roller 0Silicone rubber roller
Used for rolling QuickSeam accessories.

Επικοινωνήστε με την Mipeco

Όνομα:
E-mail:

Το μήνυμα σας:

Η MIPECO LTD

  • Η MIPECO ιδρύθηκε το 1992 από την αρχιτέκτονα-μηχανικό Ειρήνη Τσιάκκα, η οποία και διευθύνει την εταιρεία μέχρι σήμερα.

    Διαβάστε περισσότερα...

Έδρα

Παιανία, Σουλίου 55,

email: mipeco@mipeco.gr

πίσω από το Εκθεσιακό Μεσογειακό Κέντρο M.E.C.,

ΕΞΟΔΟΣ 17 Αττικής Οδού

 +30 210 6644611

 +30 210 6643825